AMF Controllers
Gennext make AMF controller (Auto start on Mains Failure Controller) starts the engine on mains failure and provides necessary engine safety. It also monitors all electrical parameters and transfers the load from Mains to DG and vice-versa. It also provides the potential-free contacts of all faults required for telecom applications.
GENCON 207 AMF Controller
Features
- Selection of 1500 rpm and 3000 rpm.
- Reduces the system cost with providing LCD display for Battery voltage, RPM, HZ, Hours.
- Integrated control buttons and relays will reduce the wiring cost.
- Emergency stop shutdown integrates timers for both energise to run and energise to stop fuel types.
- Pull and Hold coil output function.
- Selectable Auto, Manual, Test and external control modes.
- 27 variable parameters setting through front panel push buttons.
- Built in alarm annunciator for emergency faults.
- Fully sequenced start, stop cycle with clear LED display.
- Built in watch dog timer makes the system fail safe.
- Six keys facilitate mode changing, manual operation, fault acknowledge, fault reset, changing display parameter, as well as setting of different parameters.
- Twenty one LEDs are provided to indicate the status of mains, genset, load, genset faults, displayed parameter and modes.
- Size: 96×144×38mm
- Cutout Size: 92×139mm
GNX-04 AMF Controller
Features
- Selection of 1500 rpm and 3000 rpm.
- Reduces the system cost with providing LCD display for Battery voltage, RPM, HZ, Hours.
- Integrated control buttons and relays will reduce the wiring cost.
- Emergency stop shutdown integrates timers for both energise to run and energise to stop fuel types.
- All input and output are negative.
- Selectable Auto, Manual, Test and bypass modes.
- 26 variable parameters setting through front panel push buttons.
- In bypass mode unit provides all engine protections.
- Fully sequenced start, stop cycle with clear LCD display.
- Built in watch dog timer makes the system fail safe.
- Seven keys facilitate mode changing, manual operation, fault acknowledge, fault reset, changing display parameter, as well as setting of different parameters.
- Diagnostic mode is provided for checking of all input, output functionality of unit and is also used for quick panel wiring testing.
- Reduces engine gauges with providing LCD display for Oil pressure, water temperature, and fuel level.
- Size: 96×96×85mm
- Cutout Size: 92×92mm
GNX-04SP For Single Phase DG Set
Features
- Selection of 1500 rpm and 3000 rpm.
- Reduces the system cost with providing LCD display for Battery voltage, RPM, HZ, Hours.
- Integrated control buttons and relays will reduce the wiring cost.
- Emergency stop shutdown integrates timers for both energise to run and energise to stop fuel types.
- All input and output are negative.
- 22 variable parameters setting through front panel push buttons.
- Fully sequenced start, stop cycle with clear LCD display.
- Seven keys facilitate manual operation, fault acknowledge, fault reset, changing display parameter, as well as setting of different parameters.
- Reduces engine gauges with providing LCD display for Oil pressure, water temperature,and fuel level.
- Reduces multifunction meter.Displays single phase voltage,current, Frequency, PF, KW, KWH.
- Size: 96×96×85mm
- Cutout Size: 92×92mm
GCU10 AMF Controller
Features
- 1 phase / 3 phase EB voltage sensing, with display – No need of external LVM.
- User settable mains low and High EB settings.
- 1 phase / 3 phase DG voltage sensing, with display (True RMS).
- User settable DG low and High voltage settings (GVM).
- 1 phase / 3 phase DG Current sensing, with display. (fully isolated, True RMS).
- Built on overload relay with programmable thermal characteristics.
- Display of PF, KW, KWH.
- Non resettable KHW counter, Engine hour counter.
- Sensing and display of Battery voltage, Frequency and RPM.
- User selectable engine RPM – 1500 / 3000.
- Powerful manual mode with DG and EB contactor control.
- 20×4 backlit LCD, 13 LEDs and 9 keys provide easy user interface, Oil pressure, Temperature and Fuel Level sensor interface with display.
- Real Time Clock.
- Event logging of last 100 events / fault with date and time stamp.
- Optional RS485 – MODBUS RTU communication.
- Supplied with 4 channel Relay card. Includes 70 Amp. Relays for Start / Stop.
- Box dimensions - 96×192×60mm (panel mounting).
- Cutout Size - 92×188mm (panel mounting).
